HF16.3.28: Cast Iron 9/16″ Square Baluster Rake Angle / Kneewall Base Shoe With Set Screw
From: $5.93
House of Forgings | Iron Balusters and Newels | Iron Baluster Shoes
Angled shoes are at a 36 degree pitch and will usually allow up to 2 degrees more if needed. They can be used on top of iron balusters in a rake angle situation or on the bottom in a kneewall situation.
If the angle of your installation does not match the shoes, you may use a belt sander or similar to modify the shoes. You may also notch the mounting surface slightly and inset the shoe for a flush install.
- Base Size: 1 1/4″ Square
- Material: Cast Iron
- Set Screw: Yes
- Style: Rake Angle / Kneewall Shoe
- Use With: 9/16″ Solid Square Tuscan Balusters
Product Details
Interior use only.
Installation Tools and Accessories
| Brand | |
|---|---|
| Iron Finish | Oil Rubbed Bronze, Satin Black, Satin Clear |
Be the first to review “HF16.3.28: Cast Iron 9/16″ Square Baluster Rake Angle / Kneewall Base Shoe With Set Screw”
You must be logged in to post a review.
You may also like…
9/16 Inch Square Aluminum Baluster Shoes for Hollow Square Balusters
HF16.3.17: Aluminum 9/16″ Square Baluster Rake Angle / Kneewall Base Shoe With Set Screw
9/16 Inch Square Cast Iron Baluster Shoes for Solid Square Balusters
HF16.3.42: Cast Iron 9/16″ Square Baluster Level Base Collar No Set Screw
9/16 Inch Square Cast Iron Baluster Shoes for Solid Square Balusters
HF16.3.41: Cast Iron 9/16″ Square Baluster Level Base Collar No Set Screw
9/16 Inch Square Cast Iron Baluster Shoes for Solid Square Balusters
HF16.3.25: Cast Iron 9/16″ Square Baluster Level Base Shoe With Set Screw
Reviews
There are no reviews yet.